Why a custom footprint for the Nammatj 2 GT
The Nammatj 2 GT Footprint is a custom-sized groundsheet made for the Hilleberg Nammatj 2 GT tent. It covers the entire area of the tent and rainfly vestibule, so you get protection under both the sleeping area and the extended GT porch. That full coverage is the main reason to choose this footprint over a generic groundsheet: it matches the tent's shape rather than leaving gaps at the vestibule.
A good footprint helps protect your tent floor from abrasions, tree sap, and punctures, and it keeps your tent cleaner to prolong its life. It's also a lot easier to clean a footprint than it is to clean your tent, and replacing a worn footprint costs far less than replacing a damaged tent.
Key specs at a glance
- Nammatj 2 GT Footprint: Custom sized footprint for the Hilleberg Nammatj 2 GT tent. A custom fit means full coverage without trimming or folding, and it stays aligned with the tent's floor and vestibule.

Nammatj 2 GT Footprint - Nammatj 2 GT Footprint: Covers the entire area of the tent and rainfly vestibule. The vestibule is where gear sits and boots come off; covering it protects the floor from the grit and wear that area sees most.
- Nammatj 2 GT Footprint: Weight: 20 oz (565 g). Knowing the weight helps you decide whether to pack it for weight-sensitive trips or leave it home when every ounce counts.
How to attach and set up the footprint
The supplied information confirms that the footprint can attach directly to the tent and can be left connected during set up if desired. Beyond that, follow the tent's own pitching instructions for the order of setup.
- Unroll and orient the footprint: Lay the footprint out where you plan to pitch the tent. The custom shape matches the Nammatj 2 GT floor and vestibule, so align the footprint's outline with where the tent will sit.
- Attach it to the tent: The footprint can attach directly to the tent. Connect it according to the tent's attachment points before or during setup.
- Pitch the tent as usual: You can leave the footprint connected during set up if desired, which simplifies packing and pitching on subsequent nights.
- Check vestibule coverage: Make sure the footprint extends under the rainfly vestibule area. Full coverage there protects the floor from gear and foot traffic.
Groundsheet fit tips for the Nammatj 2 GT
Because this footprint is custom sized for the Nammatj 2 GT, it should match the tent's footprint without modification. If you're used to generic groundsheets, you won't need to fold or tuck excess material. The phantom see-through tent image in the product listing shows the footprint as the black area with a light gray border outlining its size and shape, which can help you visualize coverage before you buy.
When packing, keep the footprint with the tent so it's not forgotten. Since it can stay connected during setup, you can leave it attached between pitches if that suits your routine.
Caring for the footprint
The supplied information emphasizes that a footprint is easier to clean than a tent, but it doesn't include specific washing or drying instructions. Use these practical guidelines based on general groundsheet care:
- Shake off debris before packing: Dirt, needles, and grit are the main abrasives that wear tent floors. Shaking the footprint out before rolling it reduces what gets pressed against the fabric.
- Clean the footprint, not the tent: When the floor gets dirty, clean the footprint instead of scrubbing the tent floor. This preserves the tent's waterproof coating and saves effort.
- Dry before storage: Store the footprint dry to prevent mildew. The supplied information doesn't specify drying methods, so follow general best practices for synthetic fabrics.
Availability and special orders
Many out of stock Hilleberg items can be special ordered with a quick turnaround. If the Nammatj 2 GT Footprint is out of stock, contact Feathered Friends at [email protected] or call 206-292-2210 to inquire about ordering.


